Round (cylinder) paper tube
Round tube with a lift-off or plug-in lid. Our buyers use it for tea, coffee and wine.
YDP supplies round (cylinder), oval and square paper tubes for tea, coffee and wine, with custom diameter and cap options, produced and sampled to order.
No artwork needed. First reply within 24 hours.
No artwork required for the first review.
Round is the standard format; oval and square cost slightly more per unit than round.
Round tube with a lift-off or plug-in lid. Our buyers use it for tea, coffee and wine.
Same build as a round tube with an oval or square section; slightly higher unit price than round.
The tea & coffee tube page and the wine tube page go into more application-specific detail.
Half-section drawings: how each lid meets the tube wall, where the rolled edge and the optional foil lining sit.
Typical range, not a hard limit: every tube is made to your product.
| Specification | Typical range |
|---|---|
| Diameter | 50–120 mm |
| Height | 80–250 mm |
| Height — wine tubes | up to 350 mm |
| Cap style | Lift-off lid (separate lid over the tube) or plug-in lid (fits inside the tube opening) |
| Inner lining | Aluminum foil lining available, for moisture resistance |
If your product needs a size outside these ranges, send the size and we will check feasibility.
MOQ is 500 pcs for paper tubes, the same as for every box type. Sampling, production and shipping are confirmed as three separate dates for your project, because merging them into one number is how launch dates get missed.
Our sales team confirms the date of each stage for your project with the quote.
The same process for a 500 pcs first order and a repeat run.
YDP sample boxes, photographed and described part by part. Not client orders.
We quote rather than publish prices, because the same box can cost very different amounts depending on these choices.
| What you choose | How it moves the price |
|---|---|
| Format | Round is the standard. Oval and square cost slightly more per unit at the same size and quantity. |
| Size | A wider or taller tube uses more board and wrap. |
| Lid and lining | The lid style changes the parts and steps; an aluminum foil lining for tea or coffee adds a layer. |
| Wrap and finishes | Printed paper is the baseline. Specialty papers and finishes such as foil or embossing add to it. |
| Quantity and number of designs | Set-up is spread over the order quantity, so the unit price falls as quantity rises. Each extra artwork version needs its own print set-up. |
For a quote, send: what goes inside (for tea or coffee, the fill weight), the size if you know it, quantity and how many designs. How to measure.
Slightly more. Round is the standard format; oval and square cost a little more per unit at the same size and quantity. The exact difference is confirmed with the quote.
Most tubes are 50–120 mm in diameter and 80–250 mm tall. If your product needs something outside those ranges, send the size and we will confirm feasibility with the quote.
Two: a lift-off lid that sits over the tube, or a plug-in lid that fits inside the opening. Tell us how the tube will be opened and displayed and we will suggest one with the quote.
Both are settled at the sampling stage. The lid is adjusted to be tight enough that it does not fall off and loose enough to open easily, and the rolled edge is confirmed on the same sample. You check both on the physical sample, and bulk production follows the approved sample.
Yes, an aluminum foil lining inside the tube, for moisture resistance. Mention it in the quote request so it is included in the sample.
Yes, for the quote and structural stage. We can confirm structure, board and MOQ from product dimensions and reference images. Final print-ready artwork is only needed before sampling. If you do not have a designer, brand artwork design can be arranged and is discussed with your quote.
Yes, we assess it. Our stated minimum is 500 pcs for all box types. Below that, send your target quantity and we will check feasibility against your actual specification and tell you how the unit price changes, rather than refusing on the number alone.
Short guides that answer the next question buyers usually ask.
The paper tube sizes produced in China (usually 50–120 mm diameter, 80–250 mm tall, wine tubes up to 350 mm), the shapes and lids available, foil lining, and how lid fit is set on the sample and held in bulk.
Read the guide →How a paper wine tube and a rigid wine box differ in build, insert, closure and finish, why our buyers choose a box, and the MOQ for both.
Read the guide →Our first reply, within 24 hours, covers your minimum order, sample cost and timing, and material options.
No artwork required for the first review.
Page last updated