Paper tube samples: an inner neck under the lid, with and without a window
Two paper tubes made as YDP samples. The olive green one is opened to show the white inner neck that the lid slides over; the white one, with black rims at the top and base, is shown plain and with a clear-film window.
YDP sample, not a client order. Every detail below is visible in the photos; anything they do not show is left out.
No artwork needed. First reply within 24 hours.
No artwork required for the first review.
The build
| Olive green tube | White tube | |
|---|---|---|
| Shape | Round | |
| Wrap | Olive green paper with a fine texture | White, with black rims at the top of the lid and the base |
| Closure | Lift-off lid over a white inner neck | Lift-off lid, flush with the body when closed |
| Lid | Olive outside, white inside | White, black rim |
| Window | None | Made plain, and with a rectangular window covered in clear film |
How the lid closes
The olive tube is shown open, so you can see what sits under the lid: a white inner neck rising above the wrapped body. The lid slides down over the neck and rests on the body.
The white tube is shown closed: with the lid on, you only see a fine line where lid and body meet, and the outside reads as one smooth cylinder.
On every tube, the lid fit is adjusted on the physical sample, tight enough not to fall off and loose enough to open easily, and the bulk order follows the approved sample.
Plain or with a window
The two white tubes are the same shape; one has a rectangular window cut into the body and covered with clear film. A window lets the contents show on the shelf; a plain tube keeps the whole surface for artwork.
What you can change for your own tube
- Lid: a lift-off lid as on these samples, or a plug-in lid that fits inside the opening. Paper tube sizes and lids
- Size and shape: most of our tubes are 50–120 mm in diameter and 80–250 mm tall. Round is standard; oval and square cost slightly more per unit.
- Lining: an aluminum foil lining for moisture resistance, the usual choice for tea and coffee. Tea and coffee tubes
- Wrap and finish: paper color and texture, printing, foil and more. See all finishes
MOQ and lead time
MOQ is 500 pcs. Sample timing and production lead time are confirmed by our sales team with your quote.
Send your product size and quantity
Our first reply, within 24 hours, covers your minimum order, sample cost and timing, and material options.
No artwork required for the first review.
Page last updated




