Guides ›
GuidePaper tube sizes available: diameter, height, lids and linings
Most paper tubes are 50–120 mm in diameter and 80–250 mm tall; wine tubes go up to 350 mm. Round tubes are standard, oval and square as options, with a lift-off or plug-in lid. Lid fit is set on your physical sample and bulk production is checked against that sample. MOQ is 500 pcs.
No artwork needed. First reply within 24 hours.
No artwork required for the first review.
What size range is available?
Every tube is made to the product it holds, so the size comes from your product dimensions rather than a catalog. This is the range most tubes fall into:
| Dimension | Usual range | Notes |
|---|---|---|
| Diameter | 50–120 mm | Not a hard limit |
| Height | 80–250 mm | Not a hard limit |
| Height, wine tubes | Up to 350 mm | Covers a standard 750 ml bottle (around 300 mm tall) |
Outside these ranges, send the size anyway: we confirm whether we can produce it with the quote rather than refusing on the number.
Which shapes are available?
Round is the standard format. Oval and square tubes are also available. At the same size and quantity they cost slightly more per unit than round; the exact difference is confirmed with the quote.
All three shapes start at the same 500 pcs MOQ.
Which lid styles are available?
Two cap styles:
- Lift-off lid — a separate lid that sits over the top of the tube.
- Plug-in lid — a lid that fits inside the opening of the tube.
Tell us how the tube will be opened and displayed, and we will suggest one with the quote.
How is lid fit set, and held in bulk?
Lid fit is the issue that comes up most with paper tubes, so it is settled before bulk production starts:
- On the sample. The lid is adjusted until it is tight enough not to fall off and loose enough to open easily. The rolled edge at the top of the tube is confirmed on the same sample.
- You approve it in hand. Bulk production follows the sample you signed off.
- In production. Tubes are formed by hand and every unit gets a visual check. Each order is checked against the approved sample for print color and structure.
Packing counts and packing photos can be supplied before the shipment leaves.
Do we line tubes with foil?
Yes. For contents that need protecting from moisture — tea and coffee are the usual cases — we line the inside of the tube with aluminum foil. Ask for it in the quote request so it is built into the sample.
The foil lining is for moisture resistance. If you also need a fully airtight seal, say so in the quote request and we will confirm the route for your product.
Tea, coffee and wine tubes: what changes in production?
- Tea and coffee: made the same way — the same size range, the same two lid styles and the same foil lining option.
- Wine: a single-bottle tube made to the bottle, up to 350 mm tall. It normally needs no insert.
For a more premium single-bottle presentation, some brands choose a rigid wine box instead; see wine tube or rigid wine box.
What are the MOQ and lead time?
| MOQ | 500 pcs. Below that we still assess feasibility. |
|---|---|
| Sample & lead time | Confirmed by our sales team for your project, based on structure, quantity, finish and destination |
To start, send the product dimensions (for wine, bottle height and diameter), the shape and lid you have in mind, whether you need a foil lining, and the quantity. Artwork is not needed for the first review.
Where to go next
The product pages behind this guide.
Send product type and quantity
Our first reply, within 24 hours, covers your minimum order, sample cost and timing, and material options.
No artwork required for the first review.
