Skip to content
Paper Tube Packaging · Wine

Wine Bottle Tube Packaging — Paper Wine Tubes, MOQ from 500 pcs

YDP supplies round paper tubes for a single wine bottle, up to 350 mm tall, with a lift-off or plug-in lid and your own wrap and print, produced and sampled to order. For a rigid format, see wine boxes.

Illustration: tube diameter and height
Illustration
Check MOQ & sample cost

No artwork needed. First reply within 24 hours.

No artwork required for the first review.

Wine tubes

Sizing a wine tube to your bottle

A wine tube holds one bottle and is sized to it.

Height and diameter

A standard 750 ml bottle is around 300 mm tall and wine tubes can be made up to 350 mm. Send your bottle height and diameter and we size the tube to fit. The lid is either lift-off or plug-in.

Usually no insert

Because the tube is sized to the bottle, it normally needs no insert. If you want one anyway, mention it in the quote request.

Tube or rigid box

Brands that want a more premium presentation choose a rigid lid & base box instead. Send the bottle size and we recommend a format with the quote.

Closure and look

How a wine tube opens, and what goes on the outside

The parts you choose for a wine tube, all settled on the physical sample before the bulk order.

Lift-off lid

The lid slides down over the top of the tube. It can sit over an inner neck that rises above the wrapped body, or close flush so the tube reads as one smooth cylinder.

Plug-in lid

The lid fits inside the opening instead of over it. Tell us how the tube will be opened and displayed and we suggest one of the two with the quote.

Lid fit

Tight enough that the lid does not fall off, loose enough to open easily. The fit and the rolled edge are adjusted on the sample, and the bulk order follows the approved sample.

Wrap, print and window

Paper color and texture, printing, and finishes such as hot foil or embossing. A clear-film window can be cut into the body to show the bottle, or the tube can stay plain to keep the whole surface for artwork.

See both lid builds and a windowed tube on the paper tube samples, and all finishes on the finishes page.

Tube anatomy

What to measure on your bottle, and the two lid styles

Half-section drawings of a paper tube. For a wine tube, measure the bottle height (including any cork or capsule) and its widest diameter.

Illustration: tube diameter (Ø) and height (H)
What to measureMost of our tubes are 50–120 mm in diameter and 80–250 mm tall; wine tubes go up to 350 mm. Send your product size and we size the tube to it.Illustration
Illustration: lift-off lid in section, over the tube wall
Lift-off lidSits over the top of the tube. The fit is adjusted on the sample so it stays on but opens easily.Illustration
Illustration: plug-in lid in section, inside the opening
Plug-in lidFits inside the opening, its lip resting on the rolled edge. Aluminum foil lining is optional, for moisture resistance.Illustration
Have a product in mind?Send product type and quantity. Our first reply, within 24 hours, covers your minimum order, sample cost and timing, and material options.
Pricing

What changes the price of a wine tube

We quote rather than publish prices, because the same box can cost very different amounts depending on these choices.

What you chooseHow it moves the price
SizeA taller or wider tube uses more board and wrap. A standard 750 ml bottle is around 300 mm tall.
FormatRound is the standard. Oval and square cost slightly more per unit at the same size and quantity.
Lid and windowThe lid style changes the parts and steps; a clear-film window is an extra step.
Wrap and finishesPrinted paper is the baseline. Specialty papers and finishes such as foil or embossing add to it.
Quantity and number of designsSet-up is spread over the order quantity, so the unit price falls as quantity rises. Each extra artwork version needs its own print set-up.

For a quote, send: the bottle height and diameter, quantity, and how many designs. How to measure.

MOQ & lead time

MOQ 500 pcs; dates confirmed with the quote

Sampling, production and shipping are confirmed as three separate dates for your project, because merging them into one number is how launch dates get missed.

Factory visits and audits can be arranged for your order. Full size table and lid drawings: paper tube packaging. Step-by-step process: production capabilities.

Common questions

What buyers ask before quoting wine tubes

How tall can a wine tube be?

Wine tubes can be made up to 350 mm tall, which covers a standard 750 ml bottle (around 300 mm). Send your bottle height and diameter and we will size the tube to fit.

Does a wine tube need an insert?

Normally no. A wine tube holds a single bottle and is sized to that bottle, so it does not need an insert. If you want one anyway, mention it in the quote request.

Tube or rigid box for wine packaging?

A wine tube holds a single bottle and is sized to it, so it normally needs no insert. Brands that choose a rigid box (see wine boxes) do so for a more premium presentation. Send your bottle size and we will recommend a format with the quote.

What do I need to send for a wine tube quote?

The bottle height and diameter (or the bottle itself for sampling), the quantity you have in mind, and a logo file or reference photo if you have one. No finished artwork is needed for the first review.

Can a wine tube have a window?

Yes. A rectangular window covered with clear film can be cut into the tube body so the bottle shows on the shelf. Mention it in the quote request so it is included in the sample.

Can you produce packaging without final artwork?

Yes, for the quote and structural stage. We can confirm structure, board and MOQ from product dimensions and reference images. Final print-ready artwork is only needed before sampling. If you do not have a designer, brand artwork design can be arranged and is discussed with your quote.

Will you quote below the MOQ?

Yes, we assess it. Our stated minimum is 500 pcs for all box types. Below that, send your target quantity and we will check feasibility against your actual specification and tell you how the unit price changes, rather than refusing on the number alone.

Ready to check MOQ?

Send product type and quantity

Our first reply, within 24 hours, covers your minimum order, sample cost and timing, and material options.

No artwork required for the first review.

Page last updated

Need MOQ or sample cost?MOQ & price?Send product type and quantity first.
WhatsApp Get a Quote